PDF Repair Manual Download link for 2012 Honda CRV. This manual is how to install RVing Fuse Switch in 2012 Honda CRV. You can find about how to installation, removal, repair manual other for your car.
Installation Summary :
1. Slightly pull the rubber door trim in the area of the dash panel away from the door opening.
2. If necessary, remove the lower “kick panel” to separate the lower part of the dash from the kick panel (usually not required)
3. Grasp the dash panel from the left to the area below the steering wheel where it separates and gently yet firmly pull towards you while sitting in the driver’s seat. It should pop out and then can be removed with a pull.
4. Disconnect the multi-pin connector to remove the wiring from the panel.
5. Lay the panel down on a protected surface so as not to scratch or damage it.
We found this information in search engine is available on the internet. None of those materials are hosted in this server nor uploaded by me in someone’s servers. Read our DISCLAIMER for more detail.
